機箱機柜指通過鈑金加工設備（激光切割機、發泡機、數控沖床、折彎機等）加工而成的箱柜。機箱機柜適用領域廣泛，現在的廠家也不是單一的只是加工機箱機柜了，有的廠家開始自己配線，配電。

　　The chassis cabinet refers to a cabinet made by sheet metal processing equipment (laser cutting machine, foaming machine, CNC punching machine, bending machine, etc.). Chassis cabinets are widely used in various fields, and now manufacturers are not just processing chassis cabinets. Some manufacturers have started to wire and distribute power themselves.

　　1.jpg

　　1.jpg

　　機箱機柜的作用有三個方面：

　　The functions of a chassis cabinet are threefold:

　　，它提供空間給電源、主機板、各種擴展板卡、軟盤驅動器、光盤驅動器、硬盤驅動器等存儲設備，并通過機箱內部的支撐、支架、各種螺絲或卡子夾子等連接件將這些零配件牢固固定在機箱內部，形成一個集約型的整體。

　　Firstly, it provides space for storage devices such as power supplies, motherboards, various expansion boards, floppy disk drives, optical disk drives, hard disk drives, etc., and securely fixes these components inside the chassis through internal supports, brackets, various screws or clips, forming a compact whole.

　　其次，它堅實的外殼保護著板卡、電源及存儲設備，能防壓、防沖擊、防塵，并且它還能施展防電磁干擾、輻射的功能，起屏蔽電磁輻射的作用。

　　Secondly, its sturdy casing protects the board, power supply, and storage devices, providing anti pressure, anti impact, and dust-proof protection. Additionally, it can also perform anti electromagnetic interference and radiation functions, shielding electromagnetic radiation.

　　再次，它還提供了很多便于使用的面板開關指示燈等，讓操縱者更利便地操作微機或觀察微機的運行情況。我們了解機箱機柜，讓機箱機柜很好的為我們服務。

　　Again, it also provides many user-friendly panel switches, indicator lights, etc., making it easier for operators to operate or observe the operation of the microcomputer. We understand chassis cabinets and make them serve us well.

　　機箱機柜的品質直接受制造工藝的好壞的影響，工藝較高機箱的鋼板邊沿不會泛起毛邊、銳口、毛刺等現象，并且裸露的邊角都經由折邊處理，不易劃傷裝機者的手。各個插卡槽位的定位也都相稱精確，不會泛起配件安裝不上或者錯位的尷尬情況。

　　The quality of the chassis and cabinet is directly affected by the quality of the manufacturing process. The steel plate edges of the chassis with higher technology will not have burrs, sharp edges, or burrs, and the exposed corners are all folded to prevent scratching the hands of the installer. The positioning of each card slot is also equally accurate, avoiding awkward situations where accessories cannot be installed or misplaced.

　　機箱機柜設計特性

　　Design characteristics of chassis and cabinet

　　1、采用不銹鋼門軸，雙源專用端子箱把手，用箱門內部裝有限位和防反彈機構;

　　1. Adopting stainless steel door shaft, dual source dedicated terminal box handle, and equipped with limit and anti rebound mechanism inside the box door;

　　2、引線敲落孔改進為"工"字型可拆卸結構，方便了電纜的引入;

　　2. The lead knock off hole has been improved to an "I" - shaped detachable structure, which facilitates the introduction of cables;

　　3、箱體采用進口不銹鋼材料制作，強度好、硬度高、表面美觀、密封性好、抗腐蝕性強、壽命長、易維護，設計特性箱體采用進口不銹鋼材料制作，強度好、硬度高、表面美觀、密封性好、抗腐蝕性強、壽命長、易維護，是普通端子箱配電箱、動力箱理想的換代產品和上等級產品。

　　3. The box body is made of imported stainless steel material, which has good strength, high hardness, beautiful surface, good sealing, strong corrosion resistance, long service life, and easy maintenance. The design features of the box body are that it is made of imported stainless steel material, which has good strength, high hardness, beautiful surface, good sealing, strong corrosion resistance, long service life, and easy maintenance. It is the most ideal replacement product and upper grade product for ordinary terminal box distribution boxes and power boxes.

　　3.jpg

　　3.jpg

　　七個要點判斷機箱機柜的好孬：

　　Seven key points to judge the quality of a chassis cabinet:

　　1、看鋼板，鋼板一定要厚，你用手指敲一下，就能感覺到哪些厚哪些薄了。

　　1. Look at the steel plate, it must be thick. You can feel which ones are thicker and which ones are thinner by tapping with your fingers.

　　2、看噴漆，一個合格的機柜，所有的鋼材都需要噴漆，而且噴漆一定要平均，這樣才能良好地防銹、防塵等。

　　2. Looking at painting, a qualified cabinet requires all steel to be painted, and the painting must be even in order to effectively prevent rust and dust.

　　3、看架構布局，一般來說，擋板要多，而且具有散熱孔，一些用來固定線纜的鐵皮要包邊，預防損壞線纜。側壁風扇應安裝在機柜后壁，由于設備后部產生大多數的熱量。

　　3. Looking at the architecture layout, generally speaking, there should be more baffles with heat dissipation holes, and some iron sheets used to fix cables should be wrapped to prevent damage to the cables. The side wall fan should be installed on the back wall of the cabinet, as most of the heat is generated at the rear of the equipment.

　　4、看配件，因為安裝中包括網絡電纜、電信電纜和電源電纜，需要購買鉤環帶或帶齒的帶子來有效地把電纜有序的固定在機柜里面。假如機柜帶有電纜治理模塊使電纜可以直接固定在垂直安裝軌內，則再好不外。

　　4. Looking at the accessories, as the installation includes network cables, telecommunications cables, and power cables, it is necessary to purchase hook and loop or toothed straps to effectively fix the cables in an orderly manner inside the cabinet. If the cabinet is equipped with a cable management module that allows cables to be directly fixed in the vertical installation track, it would be great.

　　5、看玻璃，玻璃一定要厚一點的，還要留意玻璃的周邊是否有裂縫，假如有裂縫，就意味著有隱患了，還有要留意是否棘手。 6、看功能：考慮的應是性。

　　5. When looking at glass, it must be thicker and pay attention to whether there are cracks around the glass. If there are cracks, it means there are hidden dangers, and it is also important to pay attention to whether it is difficult. 6. When it comes to functionality, the first consideration should be security.

　　7、看散熱，估計一下你的設備發熱量有多大，一般來說，柜頂都有二到四個風扇，風扇都是多多益善的啦。還有一些用來固定機架的螺絲、螺母等，也要足量。不因日后擴展而帶來配件不足的麻煩。

　　7. Looking at the heat dissipation, estimate how much heat your device generates. Generally speaking, there are two to four fans on the top of the cabinet, and the more fans there are, the better. There are also some screws, nuts, etc. used to fix the rack, which should be sufficient. Not causing the trouble of insufficient accessories due to future expansion.

　　2.jpg

　　2.jpg

　　隨著工業4.0和制造2025的進程，在鈑金機箱機柜加工市場激烈的競爭中，多樣化、定制化是未來產品的發展趨勢，柔性化、自動化和智能化生產是企業改造升級的方向。提高系統性的解決方案水平和集成化生產能力是提高企業利潤和擴大企業生存空間的關鍵。機箱機柜作為制造業，面臨的加工難題依舊是材料的浪費和時間的消耗。如今，再加上市場對產品美觀性要求日益增多，復雜性程度也在提高、產品推陳出新速度加快，傳統的加工方式顯然力不從心。

　　With the progress of Industry 4.0 and Made in China 2025, in the fierce competition of the sheet metal chassis and cabinet processing market, diversification and customization are the development trends of future products, and flexible, automated, and intelligent production are the directions for enterprise transformation and upgrading. Improving the level of systematic solutions and integrated production capacity is the key to increasing enterprise profits and expanding their survival space. As a manufacturing industry, the biggest processing challenge faced by chassis cabinets is still the waste of materials and time consumption. Nowadays, coupled with the increasing demand for product aesthetics in the market, the level of complexity is also increasing, and the speed of product innovation is accelerating. Traditional processing methods are clearly inadequate.

　　那么，如何保證在有限的時間內制作更多更好的產品，這就是新型加工技術——高速的優勢，與普通機床相比，高速CNC有如下特點:

　　So, how to ensure the production of more and better products in a limited time is the advantage of the new machining technology - high-speed. Compared with ordinary machine tools, high-speed CNC has the following characteristics:

　　●加工精度高，具有穩定的加工質量;

　　High processing accuracy and stable processing quality;

　　●可進行多坐標的聯動，能加工形狀復雜的零件;

　　● Can perform multi coordinate linkage and process complex shaped parts;

　　●加工零件改變時，一般只需要更改數控程序，可節省生產準備時間;

　　When processing parts, it is generally only necessary to change the CNC program, which can save production preparation time;

　　●機床本身的精度高、剛性大，可選擇有利的加工用量，生產率高(一般為普通機床的3~5倍);

　　The machine tool itself has high precision and rigidity, and can choose favorable processing quantities, resulting in high productivity (generally 3-5 times that of ordinary machine tools);

　　●機床自動化程度高，可以減輕勞動強度;

　　The high degree of automation of machine tools can reduce labor intensity;

　　●對操作人員的素質要求較高，對維修人員的技術要求更高。

　　The quality requirements for operators are higher, and the technical requirements for maintenance personnel are higher.

　　真空吸附，省人力，整版加工，直接成型，以設備代替人工，節省用工成本，板材達90%利用率，帶刀庫，自動換刀，真空吸附，產品中間不會變形，小的圓弧角0.25。

　　Vacuum adsorption, labor-saving, whole plate processing, direct molding, replacing manual labor with equipment, saving labor costs, achieving a 90% utilization rate of sheet metal, with a tool magazine, automatic tool changing, vacuum adsorption, no deformation in the middle of the product, and a minimum arc angle of 0.25.

　　本文由 山東機箱機柜  友情奉獻.更多有關的知識請點擊  http://www.mtmtc88.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Shandong Chassis Cabinet For more related knowledge, please click http://www.mtmtc88.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.